xyz軟體王

DVD29775--Autodesk PowerShape 2025.0 x64 適用於複雜零件的CAD製造軟體 多國語言含中文破解版(DVD一片裝)
CID12250--紙藝大師 Pepakura Designer 6.0.1 紙模型展開圖製作軟體 英文破解版
CID12354--DATAKIT CrossManager 2024.3 x64 (CAD檔格式轉換軟體) 英文破解版
CID12358--OkMap Desktop 18.5.0 x64 專業的GPS地圖測繪和製圖互動式軟體 英文破解版
DVD29650--OriginLab OriginPro 2024 SP1 資料繪圖與資料分析處理軟體 英文破解版(DVD一片裝)

軟體簡介:

PTC.PROGRESSIVE.DIE.EXTENSION.V2.1 壓模設計英文版 (2片裝)


安裝資訊請參看 CD1 \CRACK\ 目錄中安裝說明 以下為英文說明如看不懂請勿購買

你必須擁有且安裝 Pro/ENGINEER 2001 or WILDFIRE or WILDFIRE2.0 在你之前
安裝 PDX2.1 and 你的 Pro/E license 必須支持 #208 feature(Progressive Die feature).

Install PDX2.1 till finish,
then

For Pro/E WILDFIRE or WILDFIRE 2.0:

if you have your own Pro/ENGINEER CONFIG.PRO file, you should open \text\config.pro with editor(e.g. Notepad) and copy all its contents then append these contents into your Pro/ENGINEER CONFIG.PRO, then save your own Pro/ENGINEER CONFIG.PRO.

if you didn't configigure your Pro/ENGINEER(No config.pro), just drop this \text\config.pro into any one of the following places:
A. your HOME directory
B. your Pro/ENGINEER working directory
C. your \text directory

then copy \text\config.win to your Pro/ENGINEER working directory or HOME directory.

That's all for Pro/ENGINEER WILDFIRE or WILDFIRE 2.0.

if you are using Pro/ENGINEER 2001, you should do the following step,otherwise you'll see a wrong message box
" Startup of application 'Progressive Die Extension failed' and those wrong messages "Pro/TOOLKIT application '
Progressive Die Extension' was built to run with a newer version of Pro/ENGINEER. " .

now please open \text\protk.dat with editor
find string : \$PRO_MACHINE_TYPE\pdx21.dll
chang it to : \$PRO_MACHINE_TYPE\pdx21_2001.dll


有了 Progressive Die Extension (PDX)，Pro/ENGINEER Wildfire 可幫助漸進式壓模設計者大大縮短週期、提高
品質，並有助於他們更方便地與客戶、製造等任何與工具包開發有關的人員進行交流。主要改進包括新的
自動化漸進式壓模設計功能，以及即時、對等連接功能，後者通過線上設計復審可使問題得到快速解決。